Dust collection

Since i now have a nice shop vac i decided to rig up some hookups for some of my stationary tools.

My Porter Cable Belt/Disc sander had a hookup on the back.
I decided to make a place to hook the vac up that was easier to get to on the front of the workbench.

I cut a hole in the bottom of the workbench to run the hose through.

I also installed a hookup on my table saw.

And yeah i know there are still vice grips on my tilt adjustment, some day i will get a new wheel. : )

I added a seal to my dust drawer and these hold downs to keep the drawer sealed off.

I also added plywood in between the legs of the saw base so i could hang table saw accessories.

This is where the shop vac hookup comes into the saw.

If you have any questions or comments drop me an email!